hands (hh) to Mils (mil) conversion

What is the Hand?

The hand is a non-SI unit of length used almost exclusively to measure the height of horses and other equines, taken from the withers (the ridge between the shoulder blades) to the ground.

Definition

One hand is defined as exactly 4 inches, or 0.1016 metre.

$$1\ \text{hh} = 0.101600\ \text{m}$$

Heights are conventionally written with the whole number of hands, a decimal point, and the number of remaining inches (0 to 3), so "15.2 hands" means 15 hands plus 2 inches, i.e. 62 inches, not 15.2 hands in a base-ten sense. The abbreviation is often "hh" for "hands high."

Origin and History

The hand derives from the breadth of a human hand and appears among the oldest recorded units, referenced in ancient Egyptian and Babylonian metrology. In England it was standardised by statute of Henry VIII in 1541 to a fixed 4 inches, removing its dependence on the varying size of an actual hand.

Law and Notable Facts

The hand remains the legal and customary unit for equine height in English-speaking countries, including the United States, the United Kingdom, Canada, Australia, and Ireland; most of continental Europe measures horses in centimetres instead. Because a hand is exactly 4 inches, the fractional notation ".1", ".2", and ".3" represents 1, 2, and 3 inches respectively.

Real-World Examples and Conversions

• A horse must generally stand at least 14.2 hands (58 inches, 1.4732 m) to be classed as a horse rather than a pony.
• A typical Thoroughbred racehorse stands about 16 hands (64 inches, 1.6256 m).
• The tallest horses, such as the Shire breed, can exceed 18 hands (72 inches, 1.8288 m).
• 15 hands equals 60 inches, which is exactly 1.524 m.

What is Mils?

Mils, also known as thou, is a unit of length commonly used in engineering and manufacturing, particularly in the United States. Understanding its definition and applications is crucial in various technical fields.

Definition of a Mil

A mil is defined as one thousandth of an inch. It is a small unit of length, often used when dealing with precise measurements.

$$1 \text{ mil} = \frac{1}{1000} \text{ inch} = 0.001 \text{ inch}$$

In metric units:

$$1 \text{ mil} = 0.0254 \text{ mm} = 25.4 \text{ μm}$$

Formation and Origin

The term "mil" is derived from "milli-inch," emphasizing its relationship to the inch. It was developed to simplify calculations and communication in industries where precision is paramount. Instead of dealing with fractions of an inch, engineers and manufacturers could use whole numbers of mils.

Applications of Mils

Mils are used extensively in various industries:

• Electronics: Measuring the thickness of wires, circuit boards, and coatings. For example, the thickness of the copper layer on a printed circuit board (PCB) might be specified in mils.
• Manufacturing: Specifying the thickness of plastic films, sheet metal, and other materials.
• Paper Industry: Indicating the thickness of paper and card stock.
• Coatings: Measuring the thickness of paint, varnish, and other protective layers on surfaces.

Real-World Examples in Other Quantities

While mil primarily measures length, it influences other quantities:

• Area: The cross-sectional area of wires is sometimes expressed in "circular mils" (CM), especially in electrical engineering. A circular mil is the area of a circle with a diameter of one mil.

  • $$A = d^2$$

  • Where $A$ is the area in circular mils and $d$ is the diameter in mils.
• Volume: Though less common, mil can be used to derive volume measurements when combined with other units.

Notable Associations

While no specific law or person is directly associated with the formal definition of a mil, its adoption and standardization have been driven by industry needs and engineering practices. Organizations like the American National Standards Institute (ANSI) contribute to defining and maintaining standards that include the use of mils.

Additional Resources

For more information about mils, you can refer to the following resources:

• Thousandth of an inch - Wikipedia
• Circular mil - Wikipedia