Imperial Gallons per Day (imp-gal/d) to Cubic feet per hour (ft³/h) conversion

What is the Imperial Gallon per Day?

The Imperial gallon per day (imp gal/d) is a unit of volumetric flow rate that expresses how many Imperial gallons of a fluid pass a point over the span of one day. It is used in the UK and Commonwealth countries for water supply, well yields, plumbing, and utility metering.

Definition

One Imperial gallon per day equals one Imperial gallon of volume divided by the 86,400 seconds in a day. Expressed in SI units of litres per second:

$$1\ \text{imp-gal/d} = 0.0000526168\ \text{l/s}$$

This follows directly from the exact definitions: an Imperial gallon = 4.54609 L exactly, and one day = 86,400 s, so $4.54609 \div 86400 = 5.26168 \times 10⁻⁵$ L/s.

Origin and History

The Imperial gallon was fixed by the British Weights and Measures Act of 1824, originally as the volume of 10 pounds of distilled water. It was later redefined in metric terms and, since 1985, has been exactly 4.54609 litres. Expressing flow "per day" arose naturally from water-utility billing and reservoir management, where daily throughput is the practical accounting period.

Law and Notable Facts

The Imperial gallon remains a legally recognised unit in the United Kingdom and several Commonwealth nations, distinct from the smaller US gallon (3.785411784 L exactly). Because of this, an Imperial gallon per day is about 20% larger than a US gallon per day (1 imp gal/d ≈ 1.20095 US gal/d), a difference that matters when reading equipment specified in the other system.

Real-World Examples and Conversions

• A typical UK household uses on the order of 100 Imperial gallons per day (about 455 litres), which is roughly 0.00526 L/s.
• A small trickling borehole yielding 1,000 imp gal/d supplies about 4,546 litres daily, or roughly 0.0526 L/s.
• Converting to metric daily volume: 1 imp gal/d = 4.54609 litres per day.
• 1,000,000 imp gal/d (a common water-treatment plant rating) equals about 52.6 L/s, or roughly 4.546 megalitres per day.

What is Cubic feet per hour?

Cubic feet per hour (CFH) is a unit used to measure the volumetric flow rate. It represents the volume of a substance (gas or liquid) that passes through a specific area per hour, measured in cubic feet. It's a common unit in various fields, especially when dealing with gas and air flow.

Definition of Cubic Feet per Hour

Cubic feet per hour (CFH) is defined as the volume of a substance, measured in cubic feet, that flows past a point in one hour.

$$1 \text{ CFH} = 1 \frac{\text{ft}^3}{\text{hour}}$$

How CFH is Formed

CFH is derived from the basic units of volume (cubic feet) and time (hour). It directly expresses how many cubic feet of a substance move within one hour. No special law or constant is specifically tied to the definition of CFH itself. It is a direct measure of flow rate, useful in practical applications.

Calculating Volume Flow Rate

The volume flow rate (Q) in cubic feet per hour can be determined using the following formula:

$$Q = A \cdot v$$

Where:

• $Q$ = Volume flow rate (ft³/hour)
• $A$ = Cross-sectional area of the flow (ft²)
• $v$ = Average velocity of the flow (ft/hour)

Another way to calculate it is:

$$Q = \frac{V}{t}$$

Where:

• $Q$ = Volume flow rate (ft³/hour)
• $V$ = Volume (ft³)
• $t$ = Time (hours)

Real-World Examples of CFH

• Natural Gas Consumption: Home appliances like furnaces, water heaters, and stoves are rated in terms of CFH to indicate their natural gas consumption. A typical furnace might consume 80-120 CFH of natural gas.
• HVAC Systems: Air conditioning and ventilation systems use CFH to measure the airflow rate in ductwork. A residential HVAC system might require airflow rates between 400 and 1600 CFH, depending on the size of the home.
• Compressed Air Systems: Pneumatic tools and equipment in factories use compressed air. The compressor output is often rated in CFH or cubic feet per minute (CFM, which can easily be converted to CFH by multiplying by 60) to indicate the volume of air it can supply.
• Industrial Processes: Many industrial processes, such as chemical manufacturing or food processing, involve controlling the flow rate of liquids or gases. CFH can be used to specify the desired flow rate of a particular fluid. For example, a chemical reactor might require a flow of 50 CFH of nitrogen gas.
• Ventilation Systems: Exhaust fans in bathrooms or kitchens are often rated in CFM (cubic feet per minute), which can be converted to CFH. A typical bathroom exhaust fan might be rated at 50-100 CFM, which equals 3000-6000 CFH.