Imperial Gallons per Minute (imp-gal/min) to Litres per hour (l/h) conversion

What is the Imperial Gallon per Minute?

The imperial gallon per minute is a unit of volumetric flow rate, measuring how many imperial (UK) gallons of liquid pass a point each minute. It is common in British and Commonwealth plumbing, pumping, and irrigation specifications.

Definition

One imperial gallon per minute equals one imperial gallon (4.54609 litres exactly) of volume flowing every 60 seconds:

$$1\ \text{imp-gal/min} = 0.0757682\ \text{l/s}$$

Because the imperial gallon is defined as exactly 4.54609 L, the exact relation is $4.54609 \div 60 = 0.0757681\overline{6}$ L/s. Note that the imperial gallon is about 20% larger than the US liquid gallon (3.785411784 L), so an imperial gpm is a larger flow than a US gpm.

Origin and History

The imperial gallon dates to the British Weights and Measures Act of 1824, which fixed it as the volume of 10 pounds of distilled water. It was redefined in 1976 (effective 1985) as exactly 4.54609 litres. The "per minute" flow rate arose naturally from waterworks and pump ratings, where minutes are a convenient interval for reading meters and sizing equipment.

Law and Notable Facts

The imperial gallon remains a legal unit in the United Kingdom and several Commonwealth nations, though the litre per second and cubic metre per hour are the SI-based standards for engineering. A tap flowing at 1 imp-gal/min delivers about 4.55 litres every minute; UK water-efficiency guidance often rates fittings in litres per minute, where 1 imp-gal/min corresponds to roughly 4.55 L/min.

Real-World Examples and Conversions

• A typical domestic kitchen tap or shower flows around 2 to 3 imp-gal/min (about 9 to 14 L/min).
• 1 imp-gal/min equals 60 imperial gallons per hour, or approximately 4.546 cubic metres per hour when multiplied out over an hour ($0.0757682 \text{ l/s} \times 3600 = 272.77$ litres/hour, i.e. 0.27277 m³/h).
• To convert to US gallons per minute, multiply by 1.20095: 1 imp-gal/min ≈ 1.201 US gpm.
• A small garden pump rated at 10 imp-gal/min moves about 0.758 litres per second, enough to fill a 200-litre water butt in roughly 4.4 minutes.

What is the litre per hour?

Litres per hour (L/h) is a common unit for measuring the rate at which a volume of liquid flows. Understanding its meaning and applications can be helpful in various fields.

Understanding Litres per Hour (L/h)

Litres per hour (L/h) is a unit of volume flow rate. It indicates the volume of liquid, measured in litres, that passes a specific point in one hour. In simpler terms, it tells you how many litres of a substance are moving per hour.

Formation of the Unit

The unit is formed by combining two fundamental units:

• Litre (L): A metric unit of volume, defined as the volume of one kilogram of pure water at its maximum density (approximately 4°C).
• Hour (h): A unit of time, equal to 60 minutes or 3600 seconds.

Therefore, 1 L/h means that one litre of a substance flows past a point in one hour.

Formula and Calculation

The flow rate ($Q$) in litres per hour can be calculated using the following formula:

$Q = \frac{V}{t}$

Where:

• $Q$ = Flow rate (L/h)
• $V$ = Volume (L)
• $t$ = Time (h)

Real-World Examples

Litres per hour are used in many practical applications.

• Water Usage: A household might use 500 L/h when all taps, showers, and appliances are running at once.
• Medical Infusion: An IV drip might deliver medication at a rate of 0.1 L/h.
• Fuel Consumption: A car might consume 5 L/h of fuel while idling.
• Industrial Processes: A chemical plant might pump reactants at a rate of 2000 L/h into a reactor.
• HVAC System: Condensate from a home air conditioner might drain at a rate of 1 L/h on a humid day.

Interesting Facts and Connections

While there isn't a specific "law" directly associated with litres per hour, the concept of flow rate is central to fluid dynamics, which is governed by laws like the Navier-Stokes equations. These equations describe the motion of viscous fluids and are fundamental in engineering and physics.

Conversion

Often, you might need to convert between L/h and other flow rate units. Here are some common conversions:

• 1 L/h = 0.001 $m^3$/h (cubic meters per hour)
• 1 L/h ≈ 0.264 US gallons per hour