Imperial Gallons per Second (imp-gal/s) to Cubic feet per hour (ft³/h) conversion

What is the Imperial Gallon per Second?

The Imperial gallon per second (imp-gal/s) is a unit of volumetric flow rate, expressing the volume of liquid passing a point each second measured in Imperial (UK) gallons. It appears in British and Commonwealth engineering contexts such as pump ratings, water supply, and fuel handling.

Definition

One Imperial gallon per second equals one Imperial gallon of volume flowing every second. Since the Imperial gallon is defined as exactly 4.54609 litres, the flow rate converts directly to litres per second:

$$1\ \text{imp-gal/s} = 4.54609\ \text{l/s}$$

The Imperial gallon is fixed by definition as 4.54609 L exactly (originally the volume of 10 pounds of water). This makes it noticeably larger than the US liquid gallon of 3.785411784 L, so an Imperial gallon per second delivers about 20% more volume than a US gallon per second.

Origin and History

The Imperial gallon was established by the British Weights and Measures Act of 1824, defined as the volume of ten pounds of distilled water at 62 °F. In 1985 the UK redefined it in metric terms as exactly 4.54609 litres. As a rate unit, gallons per second and the more common gallons per minute grew out of the need to specify pump and pipe throughput during the industrial era.

Law and Notable Facts

The Imperial gallon remains a legally recognised unit in the United Kingdom, though the litre is the primary trading unit under metrication. It is distinct from the US gallon: the Imperial gallon (4.54609 L) is roughly 20% larger than the US liquid gallon (3.785 L), so flow figures quoted in "gallons" must always specify which system. A flow of 1 imp-gal/s corresponds to 60 Imperial gallons per minute or 3,600 per hour.

Real-World Examples and Conversions

• A flow of 1 imp-gal/s equals 4.54609 L/s, or about 272.77 litres per minute.
• A typical domestic garden hose delivers well under 1 imp-gal/s; a rate of 1 imp-gal/s (≈16,366 L/h) is closer to a small industrial or firefighting pump.
• 1 imp-gal/s ≈ 1.20095 US gallons per second, reflecting the larger Imperial gallon.
• 1 imp-gal/s ≈ 0.00454609 cubic metres per second, useful when comparing against SI pump specifications.

What is Cubic feet per hour?

Cubic feet per hour (CFH) is a unit used to measure the volumetric flow rate. It represents the volume of a substance (gas or liquid) that passes through a specific area per hour, measured in cubic feet. It's a common unit in various fields, especially when dealing with gas and air flow.

Definition of Cubic Feet per Hour

Cubic feet per hour (CFH) is defined as the volume of a substance, measured in cubic feet, that flows past a point in one hour.

$$1 \text{ CFH} = 1 \frac{\text{ft}^3}{\text{hour}}$$

How CFH is Formed

CFH is derived from the basic units of volume (cubic feet) and time (hour). It directly expresses how many cubic feet of a substance move within one hour. No special law or constant is specifically tied to the definition of CFH itself. It is a direct measure of flow rate, useful in practical applications.

Calculating Volume Flow Rate

The volume flow rate (Q) in cubic feet per hour can be determined using the following formula:

$$Q = A \cdot v$$

Where:

• $Q$ = Volume flow rate (ft³/hour)
• $A$ = Cross-sectional area of the flow (ft²)
• $v$ = Average velocity of the flow (ft/hour)

Another way to calculate it is:

$$Q = \frac{V}{t}$$

Where:

• $Q$ = Volume flow rate (ft³/hour)
• $V$ = Volume (ft³)
• $t$ = Time (hours)

Real-World Examples of CFH

• Natural Gas Consumption: Home appliances like furnaces, water heaters, and stoves are rated in terms of CFH to indicate their natural gas consumption. A typical furnace might consume 80-120 CFH of natural gas.
• HVAC Systems: Air conditioning and ventilation systems use CFH to measure the airflow rate in ductwork. A residential HVAC system might require airflow rates between 400 and 1600 CFH, depending on the size of the home.
• Compressed Air Systems: Pneumatic tools and equipment in factories use compressed air. The compressor output is often rated in CFH or cubic feet per minute (CFM, which can easily be converted to CFH by multiplying by 60) to indicate the volume of air it can supply.
• Industrial Processes: Many industrial processes, such as chemical manufacturing or food processing, involve controlling the flow rate of liquids or gases. CFH can be used to specify the desired flow rate of a particular fluid. For example, a chemical reactor might require a flow of 50 CFH of nitrogen gas.
• Ventilation Systems: Exhaust fans in bathrooms or kitchens are often rated in CFM (cubic feet per minute), which can be converted to CFH. A typical bathroom exhaust fan might be rated at 50-100 CFM, which equals 3000-6000 CFH.