Milligrays (mGy) to Rads (Rad) conversion

What is the Milligray?

The milligray is a submultiple of the gray, the SI unit of absorbed radiation dose, equal to one-thousandth of a gray. It is the practical unit for the low doses encountered in medical imaging and everyday radiation exposure.

Definition

One milligray is 10⁻³ gray, i.e. one millijoule of radiation energy absorbed per kilogram of matter:

$$1\ \text{mGy} = 1.00000\times10^{-3}\ \text{J/kg}$$

Since 1 Gy = 1 J/kg, the milligray equals 0.001 J/kg. In the older CGS system, 1 mGy = 0.1 rad, and 1000 mGy = 1 Gy = 100 rad.

Origin and History

The milligray takes its name from the British radiobiologist Louis Harold Gray (1905–1965) combined with the metric "milli-" prefix. The gray was adopted into the SI in 1975, and its milli-submultiple quickly became standard for reporting diagnostic-imaging doses.

Law and Notable Facts

As an SI-prefixed unit, the milligray is fully official. It dominates diagnostic radiology reporting because typical imaging doses fall in the single-to-tens-of-milligray range, keeping figures conveniently sized compared with fractions of a gray.

Real-World Examples and Conversions

• 1 mGy = 0.001 Gy = 0.1 rad.
• A chest X-ray delivers roughly 0.1 mGy; a CT scan delivers tens of mGy locally.
• Average annual natural background dose is around 2–3 mGy.
• 1000 mGy = 1 gray.

What is the Rad?

The rad (radiation absorbed dose) is a non-SI unit of absorbed radiation dose, quantifying the energy deposited by ionizing radiation per unit mass of matter. It was the standard dosimetry unit in health physics and radiology before the gray was adopted.

Definition

One rad equals 100 ergs of energy absorbed per gram of material, which is exactly one-hundredth of a gray:

$$1\ \text{Rad} = 0.0100000\ \text{Gy}$$

Since the gray is defined as $1\ \text{Gy} = 1\ \text{J/kg}$, one rad corresponds to an absorbed dose of $0.01\ \text{J/kg}$, or equivalently $100\ \text{erg/g}$. The rad measures physical energy deposition only and does not by itself account for the differing biological effectiveness of radiation types.

Origin and History

The rad was introduced in 1953 by the International Commission on Radiological Units and Measurements (ICRU) to standardize the measurement of absorbed dose across all types of ionizing radiation and all absorbing media. It replaced the earlier roentgen-based dose concepts, which were tied specifically to ionization in air.

Law and Notable Facts

The rad was superseded by the SI unit gray (Gy) in 1975, and its use has been progressively phased out internationally, though it remains common in the United States. Because 1 Gy = 100 rad, converting between the two is a simple factor-of-100 shift, a frequent source of dosimetry errors when the units are mixed.

Real-World Examples and Conversions

A typical chest X-ray delivers roughly 0.01 to 0.03 rad to the patient. A whole-body dose of about 400 rad (4 Gy) is the approximate median lethal dose (LD50) for humans without medical treatment. Therapeutic radiation for cancer often delivers total tumor doses of 5,000 to 7,000 rad (50 to 70 Gy), fractionated over many sessions.