Understanding Imperial Gallons per Minute to Imperial Gallons per Hour Conversion
Both units are based on the identical 4.54609-litre Imperial gallon, so only the time base changes. Because there are sixty minutes in an hour, one Imperial gallon per minute equals exactly 60 Imperial gallons per hour. This straightforward conversion is standard in UK plumbing and water-supply calculations.
Conversion Formula
To convert Imperial Gallons per Minute to Imperial Gallons per Hour, multiply the number of Imperial Gallons per Minute by this factor:
Step-by-Step Example
Convert 25 Imperial Gallons per Minute to Imperial Gallons per Hour.
Write the formula:
Substitute the value:
Calculate the result:
How to Convert Imperial Gallons per Minute to Imperial Gallons per Hour
Use the fixed factor of 60 to turn any Imperial-gallon-per-minute flow into Imperial Gallons per Hour.
- Note the flow rate: Start with your value in Imperial Gallons per Minute (imp-gal/min).
- Apply the factor: Multiply that value by 60 to convert into Imperial Gallons per Hour (imp-gal/h).
- Read the result: The product is your flow expressed in Imperial Gallons per Hour.
For example, 25 imp-gal/min × 60 ≈ 1500 imp-gal/h.
Imperial Gallons per Minute to Imperial Gallons per Hour conversion table
| Imperial Gallons per Minute (imp-gal/min) | Imperial Gallons per Hour (imp-gal/h) |
|---|---|
| 0 | 0 |
| 1 | 60 |
| 2 | 120 |
| 3 | 180 |
| 4 | 240 |
| 5 | 300 |
| 6 | 360 |
| 7 | 420 |
| 8 | 480 |
| 9 | 540 |
| 10 | 600 |
| 15 | 900 |
| 20 | 1200 |
| 25 | 1500 |
| 30 | 1800 |
| 40 | 2400 |
| 50 | 3000 |
| 60 | 3600 |
| 70 | 4200 |
| 80 | 4800 |
| 90 | 5400 |
| 100 | 6000 |
| 150 | 9000 |
| 200 | 12000 |
| 250 | 15000 |
| 300 | 18000 |
| 400 | 24000 |
| 500 | 30000 |
| 600 | 36000 |
| 700 | 42000 |
| 800 | 48000 |
| 900 | 54000 |
| 1000 | 60000 |
| 2000 | 120000 |
| 3000 | 180000 |
| 4000 | 240000 |
| 5000 | 300000 |
| 10000 | 600000 |
| 25000 | 1500000 |
| 50000 | 3000000 |
| 100000 | 6000000 |
| 250000 | 15000000 |
| 500000 | 30000000 |
| 1000000 | 60000000 |
What is the Imperial Gallon per Minute?
The imperial gallon per minute is a unit of volumetric flow rate, measuring how many imperial (UK) gallons of liquid pass a point each minute. It is common in British and Commonwealth plumbing, pumping, and irrigation specifications.
Definition
One imperial gallon per minute equals one imperial gallon (4.54609 litres exactly) of volume flowing every 60 seconds:
Because the imperial gallon is defined as exactly 4.54609 L, the exact relation is L/s. Note that the imperial gallon is about 20% larger than the US liquid gallon (3.785411784 L), so an imperial gpm is a larger flow than a US gpm.
Origin and History
The imperial gallon dates to the British Weights and Measures Act of 1824, which fixed it as the volume of 10 pounds of distilled water. It was redefined in 1976 (effective 1985) as exactly 4.54609 litres. The "per minute" flow rate arose naturally from waterworks and pump ratings, where minutes are a convenient interval for reading meters and sizing equipment.
Law and Notable Facts
The imperial gallon remains a legal unit in the United Kingdom and several Commonwealth nations, though the litre per second and cubic metre per hour are the SI-based standards for engineering. A tap flowing at 1 imp-gal/min delivers about 4.55 litres every minute; UK water-efficiency guidance often rates fittings in litres per minute, where 1 imp-gal/min corresponds to roughly 4.55 L/min.
Real-World Examples and Conversions
- A typical domestic kitchen tap or shower flows around 2 to 3 imp-gal/min (about 9 to 14 L/min).
- 1 imp-gal/min equals 60 imperial gallons per hour, or approximately 4.546 cubic metres per hour when multiplied out over an hour ( litres/hour, i.e. 0.27277 m³/h).
- To convert to US gallons per minute, multiply by 1.20095: 1 imp-gal/min ≈ 1.201 US gpm.
- A small garden pump rated at 10 imp-gal/min moves about 0.758 litres per second, enough to fill a 200-litre water butt in roughly 4.4 minutes.
What is the Imperial Gallon per Hour?
The imperial gallon per hour (imp-gal/h) is a unit of volumetric flow rate expressing how many imperial gallons of fluid pass a point in one hour. It is used in the UK and other Commonwealth countries for pumps, fuel consumption, and plumbing flow ratings.
Definition
One imperial gallon per hour equals one imperial gallon of volume divided by one hour (3,600 seconds):
The imperial gallon is defined as exactly 4.54609 litres, so dividing by 3,600 seconds gives 4.54609 / 3600 = 0.00126280 L/s (equivalently 4.54609 L/h).
Origin and History
The imperial gallon was established by the British Weights and Measures Act of 1824, originally defined as the volume of 10 pounds of water at a specified temperature. It was later fixed by reference to the litre. The "per hour" rate arose naturally in the 19th and 20th centuries as a practical measure for pump throughput and fuel usage, hours being a convenient interval for slow, steady flows.
Law and Notable Facts
The imperial gallon (4.54609 L exactly) is legally distinct from and about 20% larger than the US liquid gallon of 3.785411784 L. As a result an imperial gallon per hour is likewise about 20% greater than a US gallon per hour. Since UK metrication, the imperial gallon is no longer a primary trade unit but persists in fuel-economy figures (miles per gallon) and equipment specifications.
Real-World Examples and Conversions
- A small garden or aquarium pump rated at 100 imp-gal/h moves about 454.6 litres of water every hour, roughly 0.126 L/s.
- A domestic tap running at 1 imperial gallon per hour is a bare trickle of about 4.55 L each hour.
- 1 imp-gal/h ≈ 0.833 US gal/h, reflecting the larger imperial gallon.
- A pump moving 220 imp-gal/h delivers about 1,000 L/h, or roughly 0.278 L/s.
Frequently Asked Questions
What is the formula to convert Imperial Gallons per Minute to Imperial Gallons per Hour?
Multiply the flow in Imperial Gallons per Minute by 60. In symbols, imp-gal/h = imp-gal/min × 60.
How many Imperial Gallons per Hour are in 1 Imperial Gallon per Minute?
One Imperial Gallon per Minute equals about 60 imp-gal/h. Conversely, one imp-gal/h is about 0.0166667 imp-gal/min.
How do I convert 10 Imperial Gallons per Minute to Imperial Gallons per Hour?
Multiply 10 by 60, which gives about 600 imp-gal/h.
Why does the Imperial gallon matter in this conversion?
The Imperial (UK) gallon is 4.54609 litres, larger than the US gallon of 3.78541 litres, so a flow in imp-gal/min must use the Imperial value to get the correct result.
Where is the Imperial Gallons per Minute to Imperial Gallons per Hour conversion used?
It is the everyday way to turn a per-minute UK flow into an hourly figure for tank-filling and supply planning.