standard atmospheres (atm) to pascals (Pa) conversion

What is the standard atmosphere?

The standard atmosphere (atm) is a unit of pressure defined as a fixed reference value close to the average atmospheric pressure at sea level. It is widely used in chemistry, physics, engineering, and diving to express pressures relative to typical sea-level conditions.

Definition

The standard atmosphere is defined exactly as 101,325 pascals:

$$1\ \text{atm} = 101325\ \text{Pa}$$

This is equivalent to 1013.25 hectopascals (millibars), 760 millimeters of mercury (torr), and about 14.6959 pounds per square inch. The value was fixed by the 10th General Conference on Weights and Measures (CGPM) in 1954.

Origin and History

Early pressure measurement grew from Evangelista Torricelli's 1643 barometer experiments, which showed the atmosphere supports a mercury column about 760 mm high. The "atmosphere" became a convenient reference for a whole unit of ambient pressure. In 1954 the CGPM adopted the exact value 101,325 Pa, based on a 760 mm mercury column at 0 °C under standard gravity, to remove the temperature and location dependence of earlier definitions.

Law and Notable Facts

The standard atmosphere is accepted for use with the SI but is not an SI unit; the SI unit of pressure is the pascal. IUPAC now recommends the bar (100,000 Pa) rather than the atmosphere as the standard pressure for reporting thermodynamic data, though "atm" remains common. Note that the technical atmosphere (at) is a different unit equal to 98,066.5 Pa.

Real-World Examples and Conversions

• Average sea-level air pressure is very close to 1 atm (101.325 kPa).
• Ocean pressure increases by roughly 1 atm for every 10 meters of seawater depth, so a diver at 30 m experiences about 4 atm total.
• A typical car tire inflated to 32 psi holds about 2.2 atm of gauge pressure.
• The pressure inside a champagne bottle is roughly 6 atm (about 608 kPa).

What is pascals?

Pascal (Pa) is the SI unit of pressure, defined as the force of one newton acting on an area of one square meter. This section will delve into the definition, formation, historical context, and practical applications of Pascal.

Pascal Definition

The pascal (Pa) is the SI derived unit of pressure used to quantify internal pressure, stress, Young's modulus, and ultimate tensile strength. It is defined as one newton per square meter.

$$1 \ Pa = 1 \frac{N}{m^2}$$

It can also be described using SI base units:

$$1 \ Pa = 1 \frac{kg}{m \cdot s^2}$$

Formation of Pascal

Pascal as a unit is derived from the fundamental units of mass (kilogram), length (meter), and time (second). Pressure, in general, is defined as force per unit area.

• Force: Measured in Newtons (N), which itself is defined as $kg \cdot m/s^2$ (from Newton's second law, $F=ma$).
• Area: Measured in square meters ($m^2$).

Thus, Pascal combines these: $N/m^2$ which translates to $(kg \cdot m/s^2) / m^2 = kg/(m \cdot s^2)$.

Blaise Pascal and Pascal's Law

The unit is named after Blaise Pascal (1623-1662), a French mathematician, physicist, inventor, writer, and Catholic theologian. He made significant contributions to the fields of mathematics, physics, and early computing.

Pascal's Law (or Pascal's Principle) states that a pressure change occurring anywhere in a confined incompressible fluid is transmitted throughout the fluid such that the same change occurs everywhere.

Mathematically, this is often represented as:

$\Delta P = \rho g \Delta h$

Where:

• $\Delta P$ is the hydrostatic pressure difference
• $\rho$ is the fluid density
• $g$ is the acceleration due to gravity
• $\Delta h$ is the height difference of the fluid

For further reading about Pascal's Law, you can refer to Pascal's Law and Hydraulics.

Real-World Examples

Here are some examples of pressure measured in Pascals or related units (like kilopascals, kPa):

• Atmospheric Pressure: Standard atmospheric pressure at sea level is approximately 101,325 Pa, or 101.325 kPa.
• Tire Pressure: Car tire pressure is often measured in PSI (pounds per square inch), but can be converted to Pascals. For example, 35 PSI is roughly 241 kPa.
• Hydraulic Systems: The pressure in hydraulic systems, like those used in car brakes or heavy machinery, can be several megapascals (MPa).
• Water Pressure: The water pressure at the bottom of a 1-meter deep pool is approximately 9.8 kPa (ignoring atmospheric pressure). The Hydrostatic pressure can be determined with formula $\Delta P = \rho g \Delta h$. Given that the density of water is approximately 1000 $kg/m^3$ and the acceleration due to gravity is 9.8 $m/s^2$
• Weather Forecasts: Atmospheric pressure changes are often reported in hectopascals (hPa), where 1 hPa = 100 Pa.