Glas (glas) to Board Feet (board-foot) conversion

What is Glas?

Glas is a Swedish unit of volume used in cooking and baking. The word "glas" is Swedish for "glass," reflecting its origin as a measure based on the contents of a drinking glass. In modern Swedish recipes it is a standardized measure.

Definition of Glas

In the standardized Swedish system of kitchen measures (matmått), one glas is defined as 2 deciliters, which is equal to 200 millilitres.

$$1 \text{ glas} = 2 \text{ dL} = 200 \text{ mL} = 0.2 \text{ L}$$

Like the other Swedish cooking measures (kryddmått, tesked, matsked, and kaffekopp), the glas follows the metric system, so conversions to litres and millilitres are exact.

Relationship to Other Units

The glas fits neatly into the family of Swedish volume measures and the wider metric system:

• 1 glas = 200 mL = 20 centilitres
• 1 glas = 2 deciliter (dL)
• 1 glas ≈ 6.76 US fluid ounces
• 1 glas ≈ 7.04 Imperial fluid ounces
• 1 glas ≈ 0.85 US cups

Because 1 kaffekopp (coffee cup) is 1.5 dL, a glas (2 dL) is slightly larger than a kaffekopp.

Historical Context

The glas belongs to the set of household measures that Swedish cooks have long used in place of scales. As Sweden adopted the metric system in the late 19th century, these traditional kitchen measures were standardized to round metric values, giving the glas its modern value of 2 dL. There is no single law or historical figure directly associated with it; rather, it reflects the gradual standardization of everyday cooking measurements.

Real-World Examples

Glas measurements appear frequently in Swedish and Scandinavian recipes:

• Baking: A cake recipe might call for 3 glas of flour.
• Cooking: A sauce or soup might need 1 glas of cream or stock.
• Drinks: Punch and cordial recipes are often measured in glas.

Converting Glas

Because the glas is defined in exact metric terms, conversion is straightforward. To convert a volume in glas to litres:

$$\text{Volume in Liters} = \text{Volume in Glas} \times 0.2$$

For example, 4 glas equals $4 \times 0.2 = 0.8$ litres (800 mL).

What is the Board Foot?

The board foot is a unit of volume used in North America to measure sawn lumber and hardwood. It represents a piece of wood one foot long, one foot wide, and one inch thick.

Definition

A board foot is defined as exactly 144 cubic inches — the volume of a board 12 in × 12 in × 1 in.

$$1\ \text{board-foot} = 2.35974\ \text{l}$$

Equivalently, one board foot equals $\frac{1}{12}$ cubic foot — the NIST Guide to the SI puts the cubic foot at exactly 2.831685×10⁻² m³ — or 2,359.74 cubic centimetres.

Origin and History

The board foot arose in the 19th-century American and Canadian lumber trade as a practical way to price rough-sawn timber by wood content rather than by finished dimensions. Because a "1-inch" board and a "12-inch" width refer to nominal (pre-planing) sizes, the board foot standardized how mills, wholesalers, and builders quoted and sold lumber. It remains the customary trade unit in the United States and Canada today.

Law and Notable Facts

The board foot is recognized in U.S. and Canadian lumber commerce and standards, where large volumes are quoted in "thousand board feet" (MBF), with M denoting the Roman numeral for 1,000. Board-foot content is calculated from nominal dimensions, so a nominal "2×4" (actually about 1.5 in × 3.5 in when surfaced) is still counted at its nominal 2 in × 4 in size — meaning the buyer pays for wood removed during planing. Rough-sawn hardwoods are commonly measured in "quarters" of nominal thickness (4/4, 5/4, 8/4).

Real-World Examples and Conversions

• A board 8 ft long × 6 in wide × 1 in thick contains $\frac{8 \times 6 \times 1}{12} = 4$ board feet.
• A nominal 2×4 stud 8 ft long counts as $\frac{2 \times 4 \times 8}{12} \approx 5.33$ board feet.
• One thousand board feet (1 MBF) equals about 2.36 cubic metres of wood, a typical way to price bulk lumber shipments.
• One board foot equals roughly 2.36 litres, so a small stack of ten board feet holds about 23.6 litres of wood volume.