Imperial Gallons per Hour (imp-gal/h) to Cubic feet per hour (ft³/h) conversion

What is the Imperial Gallon per Hour?

The imperial gallon per hour (imp-gal/h) is a unit of volumetric flow rate expressing how many imperial gallons of fluid pass a point in one hour. It is used in the UK and other Commonwealth countries for pumps, fuel consumption, and plumbing flow ratings.

Definition

One imperial gallon per hour equals one imperial gallon of volume divided by one hour (3,600 seconds):

$$1\ \text{imp-gal/h} = 0.00126280\ \text{l/s}$$

The imperial gallon is defined as exactly 4.54609 litres, so dividing by 3,600 seconds gives 4.54609 / 3600 = 0.00126280 L/s (equivalently 4.54609 L/h).

Origin and History

The imperial gallon was established by the British Weights and Measures Act of 1824, originally defined as the volume of 10 pounds of water at a specified temperature. It was later fixed by reference to the litre. The "per hour" rate arose naturally in the 19th and 20th centuries as a practical measure for pump throughput and fuel usage, hours being a convenient interval for slow, steady flows.

Law and Notable Facts

The imperial gallon (4.54609 L exactly) is legally distinct from and about 20% larger than the US liquid gallon of 3.785411784 L. As a result an imperial gallon per hour is likewise about 20% greater than a US gallon per hour. Since UK metrication, the imperial gallon is no longer a primary trade unit but persists in fuel-economy figures (miles per gallon) and equipment specifications.

Real-World Examples and Conversions

• A small garden or aquarium pump rated at 100 imp-gal/h moves about 454.6 litres of water every hour, roughly 0.126 L/s.
• A domestic tap running at 1 imperial gallon per hour is a bare trickle of about 4.55 L each hour.
• 1 imp-gal/h ≈ 0.833 US gal/h, reflecting the larger imperial gallon.
• A pump moving 220 imp-gal/h delivers about 1,000 L/h, or roughly 0.278 L/s.

What is Cubic feet per hour?

Cubic feet per hour (CFH) is a unit used to measure the volumetric flow rate. It represents the volume of a substance (gas or liquid) that passes through a specific area per hour, measured in cubic feet. It's a common unit in various fields, especially when dealing with gas and air flow.

Definition of Cubic Feet per Hour

Cubic feet per hour (CFH) is defined as the volume of a substance, measured in cubic feet, that flows past a point in one hour.

$$1 \text{ CFH} = 1 \frac{\text{ft}^3}{\text{hour}}$$

How CFH is Formed

CFH is derived from the basic units of volume (cubic feet) and time (hour). It directly expresses how many cubic feet of a substance move within one hour. No special law or constant is specifically tied to the definition of CFH itself. It is a direct measure of flow rate, useful in practical applications.

Calculating Volume Flow Rate

The volume flow rate (Q) in cubic feet per hour can be determined using the following formula:

$$Q = A \cdot v$$

Where:

• $Q$ = Volume flow rate (ft³/hour)
• $A$ = Cross-sectional area of the flow (ft²)
• $v$ = Average velocity of the flow (ft/hour)

Another way to calculate it is:

$$Q = \frac{V}{t}$$

Where:

• $Q$ = Volume flow rate (ft³/hour)
• $V$ = Volume (ft³)
• $t$ = Time (hours)

Real-World Examples of CFH

• Natural Gas Consumption: Home appliances like furnaces, water heaters, and stoves are rated in terms of CFH to indicate their natural gas consumption. A typical furnace might consume 80-120 CFH of natural gas.
• HVAC Systems: Air conditioning and ventilation systems use CFH to measure the airflow rate in ductwork. A residential HVAC system might require airflow rates between 400 and 1600 CFH, depending on the size of the home.
• Compressed Air Systems: Pneumatic tools and equipment in factories use compressed air. The compressor output is often rated in CFH or cubic feet per minute (CFM, which can easily be converted to CFH by multiplying by 60) to indicate the volume of air it can supply.
• Industrial Processes: Many industrial processes, such as chemical manufacturing or food processing, involve controlling the flow rate of liquids or gases. CFH can be used to specify the desired flow rate of a particular fluid. For example, a chemical reactor might require a flow of 50 CFH of nitrogen gas.
• Ventilation Systems: Exhaust fans in bathrooms or kitchens are often rated in CFM (cubic feet per minute), which can be converted to CFH. A typical bathroom exhaust fan might be rated at 50-100 CFM, which equals 3000-6000 CFH.