JPG to M2TS Converter
Initializing... drag & drop files here
Supports: JPG, JPEG, JFIF
Advanced Options - Our defaults are optimized for the best results. We recommend you keeping the defaults unless you have a specific need.
Reset to defaults
Need help?JPG to M2TS Converter
This tool turns a single JPG photo into an M2TS video clip — it holds your still image on screen for a duration you choose, with no motion and no audio track, and wraps it in the BDAV MPEG-2 Transport Stream container that Blu-ray Discs and AVCHD camcorders use. The point is not playback for its own sake: M2TS is an awkward format to watch directly, so this conversion exists to produce a clip that drops cleanly into a Blu-ray or AVCHD authoring project — a title card, a still-photo chapter, or a slate ahead of footage shot on the same disc standard. Files are uploaded over an encrypted connection, processed on our servers, and deleted automatically a few hours after conversion — no sign-up, no watermark, never shared or made public.
M2TS Format at a Glance
| Property | Value |
|---|---|
| Full name | BDAV MPEG-2 Transport Stream |
| Defined by | Blu-ray Disc Association |
| Container | MPEG-2 Transport Stream (variable-rate, not the constant-rate stream used in MPEG-2 broadcast) |
| Video codecs (Blu-ray) | H.262/MPEG-2 Part 2, H.264/MPEG-4 AVC, or SMPTE VC-1 |
| Video codecs (AVCHD) | H.264/MPEG-4 AVC only |
| Audio codecs | Dolby Digital (AC-3), DTS, or uncompressed Linear PCM; AVCHD uses AC-3 or LPCM |
| File extension cousin | .MTS (camcorder 8.3 filenames) vs .m2ts (Blu-ray long filenames) — same BDAV container |
| Best for | Blu-ray Disc and AVCHD authoring workflows |
JPG Format at a Glance
| Property | Value |
|---|---|
| Full name | Joint Photographic Experts Group image |
| Standard | ITU-T T.81 / ISO-IEC 10918-1 |
| Released | September 1992 |
| Compression | Lossy DCT-based (a near-lossless mode exists but is rare) |
| Color | 24-bit RGB (no alpha transparency) |
| Best for | Photographs and still source frames for video |
How to Convert JPG to M2TS
- Upload Your JPG File: Drag and drop your photo onto the page or click "+ Add Files". JPEG and JFIF files are accepted too.
- Set the Image Duration: Choose how long the still is held on screen — the default is 5 seconds per image; longer values make a longer clip from the same photo.
- Pick Resolution and Quality (Optional): Keep the original size or choose a Fixed Resolution preset (1080p, 720p, and others), and leave the Quality Preset at "Very High" for a clean title card. A Background Color (black by default) fills any letterbox area if your photo's shape does not match the chosen frame.
- Convert and Download: Click "Convert" and download the M2TS file. No sign-up, no watermark.
Frequently Asked Questions
Does the output M2TS play on its own, or do I need to author it?
It is a valid M2TS clip, but M2TS is built to live on a disc, not in a download. Most desktop players (VLC, for example) will open it, while the stock Windows and macOS players often will not. The intended path is to import the clip into Blu-ray or AVCHD authoring software, which writes it into the disc structure alongside your other titles.
Which video codec does the clip use, and can I match my AVCHD project?
The Video Codec dropdown in Advanced Options lets you pick the encoder. For an AVCHD camcorder workflow choose H.264/AVC, since AVCHD permits only that codec; for a Blu-ray (BDMV) project you can use H.264 or MPEG-2, both of which the Blu-ray spec allows in the BDAV container. Matching your project's codec avoids a re-encode when you author the disc.
Is there any audio in the file?
No. This converter holds a single still image with no soundtrack, so the M2TS contains a video stream only. If your authoring tool expects an audio track on every title, add silence or a music bed in that tool after import rather than expecting it from the still.
Why is my photo letterboxed or pillarboxed in the clip?
Video frames are fixed shapes — 1920x1080 is 16:9, for instance — and a photo with a different aspect ratio is fitted inside without distortion, leaving bars on the unused sides. Those bars take the Background Color you selected (black by default). Cropping the JPG to the target ratio before converting removes them.
What is the difference between .m2ts and .mts?
They are the same BDAV container under two filename conventions. Camcorders that follow the legacy 8.3 naming scheme write .MTS, while Blu-ray Discs, which allow long filenames, use .m2ts. If a tool only accepts one extension, renaming the file between .mts and .m2ts is usually enough because the bytes inside are identical.
How long does the conversion take and what about large photos?
In our testing a single full-resolution JPG at the default 5-second duration converts in a few seconds; encoding time grows mainly with the duration you set and the output resolution, not the size of the source photo. The practical limit you will hit first is upload time for a very large image over a slow connection, not the encode itself.
Can I turn several JPGs into one M2TS slideshow?
Yes. Add multiple photos and use the Merge strategy control — "Merge images" stitches them into one M2TS where each photo is shown for the duration you set, while "Video per image" outputs a separate clip for each. For a more conventional, widely playable slideshow, JPG to MP4 is the better-supported target outside a disc-authoring context.
How do I go the other way, from M2TS back to something playable?
Use a reverse converter such as M2TS to MP4, which unwraps the BDAV stream into an MP4 that plays on phones, browsers, and standard media players. If your end goal is an AVCHD disc rather than M2TS specifically, JPG to AVCHD produces the AVCHD-flavored output directly.