OGV to RM Converter
Initializing... drag & drop files here
Supports: OGV
Advanced Options - Our defaults are optimized for the best results. We recommend you keeping the defaults unless you have a specific need.
Reset to defaults
Need help?OGV to RM Converter
OGV is the Ogg video container, almost always carrying Theora video and Vorbis audio — an open-web format that modern browsers have walked away from (Chrome removed Theora decoding in version 123, March 2024). RM is RealMedia, the proprietary streaming container RealNetworks introduced in 1997 for the dial-up era. Converting one to the other is a niche, legacy-to-legacy job: you would only do it to feed an old RealPlayer-based archive or workflow. For a clip that plays everywhere today, convert OGV to MP4 instead; for a modern open-web video, convert OGV to WebM.
OGV Format at a Glance
| Property | Value |
|---|---|
| Container | Ogg (Xiph.Org) |
| Typical video codec | Theora (VP3-derived) |
| Typical audio codec | Vorbis |
| Released | Theora 1.0 finalized 2008; Ogg container 2000 |
| Compression | Lossy, open and royalty-free |
| Browser support | Dropped in Chrome 123 (Mar 2024); Firefox still decodes Theora; not supported in Safari |
| Best for | Legacy open-source and Wikimedia-era web video |
| Superseded by | WebM (VP8/VP9) and MP4 (H.264/AV1) |
RM Format at a Glance
| Property | Value |
|---|---|
| Container | RealMedia (RealNetworks), .rm |
| Video codec written here | RealVideo RV10 / RV20 (H.263-based) |
| Audio codec written here | RealAudio 1.0 (RealAudio 14.4) |
| Released | 1997, built for 56 kbps dial-up streaming |
| Compression | Lossy, proprietary, constant-bitrate oriented |
| Native playback today | RealPlayer; VLC, MPlayer, PotPlayer, and K-Lite decode it |
| Best for | Legacy RealPlayer archives and old streaming workflows |
| Note | Newer RV30/RV40 are decode-only in open tools — not produced here |
How to Convert OGV to RM
- Upload Your OGV File: Drag and drop your .ogv file onto the page or click "Add Files". You can queue several files and convert them with the same settings.
- Set the Quality Preset: Under Advanced Options, the Preset defaults to "Very High (Recommended)"; lower it (or switch to Specific file size / Constant Bitrate) to shrink the output, since RM's RV10/RV20 encoder is far less efficient than modern codecs.
- Adjust Resolution or Trim (Optional): Use Video resolution to keep the original size, apply a Preset Resolution, or set Width x Height; use Trim with a Time Range to export only part of the clip.
- Convert and Download: Click Convert and download the .rm file. Files are uploaded over an encrypted connection, processed on our servers, and deleted automatically after a few hours — no sign-up, no watermark.
Why This Conversion Rarely Makes Sense
Both formats are dead ends for the modern web, so this is a lossy re-encode that can only lose quality, never add it. Theora is already decoded out of Chrome, and RM needs RealPlayer or a codec pack such as VLC or K-Lite to play at all. The output here uses the H.263-based RealVideo RV10/RV20 line, which predates H.264 and compresses worse than the Theora source you started with. The single legitimate reason to want RM is compatibility with an existing RealPlayer-based system or archive. If your goal is simply a video that opens everywhere, MP4 (H.264) is the correct target, and WebM is the right open-web choice.
Frequently Asked Questions
Which RealVideo codec does the RM output use?
This converter writes RealVideo RV10/RV20 (the H.263-based RealVideo 1.0 / G2 line) with RealAudio 1.0. It does not produce RV30 or RV40, the later H.264-based RealVideo versions — open-source encoders, including the FFmpeg pipeline this tool uses, can decode RV40 but cannot encode it.
Will converting OGV to RM improve the quality?
No. Going from Theora to RealVideo RV10/RV20 is a lossy re-encode between two older codecs, so the output can only match or fall below the source. In our testing, an RM export at the default Very High preset was visibly softer than the Theora original at a comparable file size, because RV10/RV20 predates the more efficient compression in Theora.
What plays an RM file in 2026?
RealPlayer plays RM natively, but you do not need it. VLC, MPlayer, PotPlayer, and Windows Media Player with the K-Lite codec pack all decode RealMedia. Web browsers and most mobile players do not support RM out of the box, which is why converting to MP4 is usually the better fix for sharing.
Should I convert OGV to MP4 or WebM instead?
For almost every modern use, yes. Convert OGV to MP4 for an H.264 file that plays on phones, browsers, and TVs, or convert OGV to WebM for an open-format file that streams in current browsers. Choose RM only when an old RealPlayer-based system specifically requires it.
Can I get the original OGV back from an RM file later?
Not at full quality. Because every step is a lossy re-encode, converting RM back to MP4 or any other format will not restore the detail lost in the OGV-to-RM pass. Keep your original .ogv file if you may need a clean copy.
Are my files kept private during conversion?
Yes. Your OGV file is uploaded over an encrypted connection, processed on our servers, and deleted automatically after a few hours. There is no sign-up, no watermark, and files are never shared or made public.